# Search

In Typesense, a search consists of a query against one or more text fields and a list of filters against numerical or facet fields. You can also sort and facet your results.

Sample Response

When a string[] field is queried, the highlights structure will include the corresponding matching array indices of the snippets. For e.g:

# Search Parameters

# Query parameters

Parameter	Required	Description
q	yes	The query text to search for in the collection. Use `` as the search string to return all documents. This is typically useful when used in conjunction with `filter_by`. For example, to return all documents that match a filter, use:`q=&filter_by=num_employees:10`. To exclude words in your query explicitly, prefix the word with the `-` operator, e.g. `q: 'electric car -tesla'`.
query_by	yes	One or more `string / string[]` fields that should be queried against. Separate multiple fields with a comma: `company_name, country` The order of the fields is important: a record that matches on a field earlier in the list is considered more relevant than a record matched on a field later in the list. So, in the example above, documents that match on the `company_name` field are ranked above documents matched on the `country` field.
prefix	no	Indicates that the last word in the query should be treated as a prefix, and not as a whole word. This is necessary for building autocomplete and instant search interfaces. Set this to `false` to disable prefix searching for all queried fields. You can also control the behavior of prefix search on a per field basis. For example, if you are querying 3 fields and want to enable prefix searching only on the first field, use `?prefix=true,false,false`. The order should match the order of fields in `query_by`. If a single value is specified for `prefix` the same value is used for all fields specified in `query_by`. Default: `true` (prefix searching is enabled for all fields).
infix	no	Since infix searching requires an additional data structure, you have to enable it on a per-field basis like this: `{"name": "part_number", "type": "string", "infix": true }` If infix index is enabled for this field, infix searching can be done on a per-field basis by sending a comma separated string parameter called infix to the search query. This parameter can have 3 values: `off`: infix search is disabled, which is default `always`: infix search is performed along with regular search `fallback`: infix search is performed if regular search does not produce results For example, if you are querying two fields via `?query_by=title,part_number`, you can enable infix searching only for the `part_number` field, by sending `?infix=off,always` (in the same order of the fields in `query_by`). There are also 2 parameters that allow you to control the extent of infix searching: `max_extra_prefix` and `max_extra_suffix` which specify the maximum number of symbols before or after the query that can be present in the token. For example: query "K2100" has 2 extra symbols in "6PK2100". By default, any number of prefixes/suffixes can be present for a match.
pre_segmented_query	no	Set this parameter to `true` if you wish to split the search query into space separated words yourself. When set to `true`, we will only split the search query by space, instead of using the locale-aware, built-in tokenizer. Default: `false`
preset	no	The name of the Preset to use for this search. Presets allow you to save a set of search parameters and use them at search time, with a single `preset` parameter. Read more about Presets here.

# Filter parameters

Parameter	Required	Description
filter_by	no	Filter conditions for refining your search results. A field can be matched against one or more values. Examples: - `country: USA` - `country: [USA, UK]` returns documents that have `country` of `USA` OR `UK`. Exact Filtering: To match a string field exactly, you can use the `:=` operator. For eg: `category:= Shoe` will match documents from the category shoes and not from a category like `shoe rack`. Escaping Commas: You can also filter using multiple values and use the backtick character to denote a string literal: category:= [`Running Shoes, Men`, Sneaker]. Negation: Not equals / negation is supported for string and boolean facet fields, e.g. `filter_by=author:!=JK Rowling` or multiple negations of a facet that should not be included in the query: `filter_by=author:!=[JK Rowling,Gilbert Patten]` Numeric Filtering: Filter documents with numeric values between a min and max value, using the range operator `[min..max]` or using simple comparison operators `>`, `>=` `<`, `<=`, `=`. Examples: -`num_employees:[10..100]` -`num_employees:<40` -`num_employees:[10..100,40]` (Filter docs where value is between 10 to 100 or exactly 40). Multiple Conditions: You can separate multiple conditions with the `&&` operator. Examples: - `num_employees:>100 && country: [USA, UK]` - `categories:=Shoes && categories:=Outdoor` To do ORs across different fields (eg: color is blue OR category is Shoe), you can use the `\|\|` operator. Examples: - `color: blue \|\| category: shoe` - `(color: blue \|\| category: shoe) && in_stock: true` Filtering Arrays: filter_by can be used with array fields as well. For eg: If `genres` is a `string[]` field: - `genres:=[Rock, Pop]` will return documents where the `genres` array field contains `Rock OR Pop`. - `genres:=Rock && genres:=Acoustic` will return documents where the `genres` array field contains both `Rock AND Acoustic`. Geo Filtering: Read more about GeoSearch and filtering in this dedicated section.

# Ranking and Sorting parameters

Parameter	Required	Description
query_by_weights	no	The relative weight to give each `query_by` field when ranking results. Values can be between `0` and `127`. This can be used to boost fields in priority, when looking for matches. Separate each weight with a comma, in the same order as the `query_by` fields. For eg: `query_by_weights: 1,1,2` with `query_by: field_a,field_b,field_c` will give equal weightage to `field_a` and `field_b`, and will give twice the weightage to `field_c` comparatively. Default: If no explicit weights are provided, fields earlier in the `query_by` list will be considered to have greater weight.
text_match_type	no	In a multi-field matching context, this parameter determines how the representative text match score of a record is calculated. Possible values: `max_score` (default) or `max_weight`. In the default `max_score` mode, the best text match score across all fields are used as the representative score of this record. Field weights are used as tie breakers when 2 records share the same text match score. In the `max_weight` mode, the text match score of the highest weighted field is used as the representative text relevancy score of the record.
sort_by	no	A list of fields and their corresponding sort orders that will be used for ordering your results. Separate multiple fields with a comma. Up to 3 sort fields can be specified in a single search query, and they'll be used as a tie-breaker - if the first value in the first `sort_by` field ties for a set of documents, the value in the second `sort_by` field is used to break the tie, and if that also ties, the value in the 3rd field is used to break the tie between documents. If all 3 fields tie, the document insertion order is used to break the final tie. E.g. `num_employees:desc,year_started:asc` This results in documents being sorted by `num_employees` in descending order, and if two records have the same `num_employees`, the `year_started` field is used to break the tie. The text similarity score is exposed as a special `_text_match` field that you can use in the list of sorting fields. If one or two sorting fields are specified, `_text_match` is used for tie breaking, as the last sorting field. Default: If no `sort_by` parameter is specified, results are sorted by: `_text_match:desc,default_sorting_field:desc`. Sorting on String Values: Read more here. Sorting on Missing Values: Read more here. Sorting Based on Conditions (aka Optional Filtering): Read more here. GeoSort: When using GeoSearch, documents can be sorted around a given lat/long using `location_field_name(48.853, 2.344):asc`. You can also sort by additional fields within a radius. Read more here.
prioritize_exact_match	no	By default, Typesense prioritizes documents whose field value matches exactly with the query. Set this parameter to `false` to disable this behavior. Default: `true`
prioritize_token_position	no	Make Typesense prioritize documents where the query words appear earlier in the text. Default: `false`
pinned_hits	no	A list of records to unconditionally include in the search results at specific positions. An example use case would be to feature or promote certain items on the top of search results. A comma separated list of `record_id:hit_position`. Eg: to include a record with ID 123 at Position 1 and another record with ID 456 at Position 5, you'd specify `123:1,456:5`. You could also use the Overrides feature to override search results based on rules. Overrides are applied first, followed by pinned_hits and finally hidden_hits.
hidden_hits	no	A list of records to unconditionally hide from search results. A comma separated list of `record_ids` to hide. Eg: to hide records with IDs 123 and 456, you'd specify `123,456`. You could also use the Overrides feature to override search results based on rules. Overrides are applied first, followed by pinned_hits and finally hidden_hits.
enable_overrides	no	If you have some overrides defined but want to disable all of them for a particular search query, set `enable_overrides` to `false`. Default: `true`

# Pagination parameters

Parameter	Required	Description
page	no	Results from this specific page number would be fetched. Page numbers start at `1` for the first page. Default: `1`
per_page	no	Number of results to fetch per page. When `group_by` is used, `per_page` refers to the number of groups to fetch per page, in order to properly preserve pagination. Default: `10` NOTE: Only upto 250 hits (or groups of hits when using `group_by`) can be fetched per page.

# Faceting parameters

Parameter	Required	Description
facet_by	no	A list of fields that will be used for faceting your results on. Separate multiple fields with a comma.
max_facet_values	no	Maximum number of facet values to be returned. Default: `10`
facet_query	no	Facet values that are returned can now be filtered via this parameter. The matching facet text is also highlighted. For example, when faceting by `category`, you can set `facet_query=category:shoe` to return only facet values that contain the prefix "shoe". Use the `facet_query_num_typos` parameter to control the fuzziness of this facet value filter.
facet_query_num_typos	no	Controls the fuzziness of the facet query filter. Default: `2`.

# Grouping parameters

Parameter	Required	Description
group_by	no	You can aggregate search results into groups or buckets by specify one or more `group_by` fields. Separate multiple fields with a comma. NOTE: To group on a particular field, it must be a faceted field. E.g. `group_by=country,company_name`
group_limit	no	Maximum number of hits to be returned for every group. If the `group_limit` is set as `K` then only the top K hits in each group are returned in the response. Default: `3`

# Results parameters

Parameter	Required	Description
include_fields	no	Comma-separated list of fields from the document to include in the search result.
exclude_fields	no	Comma-separated list of fields from the document to exclude in the search result. You can use this parameter in a scoped API key to exclude / hide potentially sensitive fields like `out_of` and `search_time_ms` from the search API response.
highlight_fields	no	Comma separated list of fields that should be highlighted with snippetting. You can use this parameter to highlight fields that you don't query for, as well. Default: all queried fields will be highlighted. Set to `none` to disable snippetting fully.
highlight_full_fields	no	Comma separated list of fields which should be highlighted fully without snippeting. Default: all fields will be snippeted. Set to `none` to disable highlighting fully.
highlight_affix_num_tokens	no	The number of tokens that should surround the highlighted text on each side. This controls the length of the snippet. Default: `4`
highlight_start_tag	no	The start tag used for the highlighted snippets. Default: `<mark>`
highlight_end_tag	no	The end tag used for the highlighted snippets. Default: `</mark>`
enable_highlight_v1	no	Flag for disabling the deprecated, old highlight structure in the response. Default: `true`
snippet_threshold	no	Field values under this length will be fully highlighted, instead of showing a snippet of relevant portion. Default: `30`
limit_hits	no	Maximum number of hits that can be fetched from the collection. Eg: `200` `page * per_page` should be less than this number for the search request to return results. Default: no limit You'd typically want to generate a scoped API key with this parameter embedded and use that API key to perform the search, so it's automatically applied and can't be changed at search time.
search_cutoff_ms	no	Typesense will attempt to return results early if the cutoff time has elapsed. This is not a strict guarantee and facet computation is not bound by this parameter. Default: no search cutoff happens.
max_candidates	no	Control the number of words that Typesense considers for typo and prefix searching . Default: `4` (or `10000` if `exhaustive_search` is enabled).
exhaustive_search	no	Setting this to `true` will make Typesense consider all variations of prefixes and typo corrections of the words in the query exhaustively, without stopping early when enough results are found (`drop_tokens_threshold` and `typo_tokens_threshold` configurations are ignored). Default: `false`

# Typo-Tolerance parameters

Parameter	Required	Description
num_typos	no	Maximum number of typographical errors (0, 1 or 2) that would be tolerated. Damerau–Levenshtein distance (opens new window) is used to calculate the number of errors. You can also control `num_typos` on a per field basis. For example, if you are querying 3 fields and want to disable typo tolerance on the first field, use `?num_typos=0,1,1`. The order should match the order of fields in `query_by`. If a single value is specified for `num_typos` the same value is used for all fields specified in `query_by`. Default: `2` (`num_typos` is `2` for all fields specified in `query_by`).
min_len_1typo	no	Minimum word length for 1-typo correction to be applied. The value of `num_typos` is still treated as the maximum allowed typos. Default: `4`.
min_len_2typo	no	Minimum word length for 2-typo correction to be applied. The value of `num_typos` is still treated as the maximum allowed typos. Default: `7`.
split_join_tokens	no	Treat space as typo: search for `q=basket ball` if `q=basketball` is not found or vice-versa. Splitting/joining of tokens will only be attempted if the original query produces no results. To always trigger this behavior, set value to `always`. To disable, set value to `off`. Default: `fallback`.
typo_tokens_threshold	no	If at least `typo_tokens_threshold` number of results are not found for a specific query, Typesense will attempt to look for results with more typos until `num_typos` is reached or enough results are found. Set `typo_tokens_threshold` to `0` to disable typo tolerance. Default: `1`
drop_tokens_threshold	no	If at least `drop_tokens_threshold` number of results are not found for a specific query, Typesense will attempt to drop tokens (words) in the query until enough results are found. Tokens that have the least individual hits are dropped first. Set `drop_tokens_threshold` to `0` to disable dropping of tokens. Default: `1`

# Caching parameters

Parameter	Required	Description
use_cache	no	Enable server side caching of search query results. By default, caching is disabled. Default: `false`
cache_ttl	no	The duration (in seconds) that determines how long the search query is cached. This value can only be set as part of a scoped API key. Default: `60`

# Filter Results

You can use the filter_by search parameter to filter results by a particular value(s) or logical expressions.

For eg: if you have dataset of movies, you can apply a filter to only return movies in a certain genre or published after a certain date, etc.

🔗 You'll find detailed documentation for filter_by in the Filter Parameters table above.

You can use the facet_by search parameter to have Typesense return aggregate counts of values for one or more fields. For integer fields, Typesense will also return min, max, sum and average values, in addition to counts.

🔗 You'll find detailed documentation for facet_by in the Facet Parameters table above.

Example: if you have a dataset of songs (opens new window) like in the screenshot below, the count next to each of the "Release Dates" and "Artists" on the left is obtained by faceting on the release_date and artist fields.

Faceting Usecase Example

This is useful to show users a summary of results, so they can refine the results further to get to what they're looking for efficiently.

Note that you need to enable faceting for fields in the Collection Schema before using it in facet_by like this:

{
  fields: [
    {
      facet: true, 
      name: "<field>", 
      type: "<datatype>"
    }
  ]
}

# Sort Results

You can use the sort_by search parameter to sort results by upto 3 fields in a tie-breaking mechanism - if the first field has the same values, then the second field is used. If the 1st and 2nd fields have the same values, then the 3rd field is used to break the tie.

The text similarity score is exposed as a special _text_match field that you can use in the list of sorting fields.

🔗 You'll find detailed documentation for sort_by in the Ranking Parameters table above.

# Sorting on numeric values

Sorting is enabled by default on all numeric and boolean values. You can directly use these fields in the sort_by parameter.

# Sorting on strings

Sorting on a string field is only allowed if that field has the sort property enabled in the collection schema.

For e.g. here's a collection schema where sorting is allowed on the email string field.

{
  "name": "users",
  "fields": [
    {"name": "name", "type": "string" },
    {
      "name": "email", 
      "type": "string", 
      "sort": true 
    }
  ]
}

In the users collection defined above, the email field can be sorted upon, but the name field is not sortable.

TIP

Sorting on a string field requires the construction of a separate index that can consume a lot of memory for long string fields (like description) or in large datasets. So, care must be taken to enable sorting on only relevant string fields.

# Sorting based on conditions

You can sort documents based on any expressions that evaluate to either true or false, using the special _eval(<expression>) operation as a sort_by parameter.

The syntax for the expression inside _eval() is the same as the filter_by search parameter, so we also call this feature "Optional Filtering".

For eg:

sort_by: _eval(in_stock:true):desc,popularity:desc

This will result in documents where in_stock is set to true to be ranked first, followed by documents where in_stock is set to false.

# Sorting null, empty or missing values

For optional numerical fields, missing or null values are always sorted to the end regardless of the sort order.

In the case of optional string fields, empty (""), missing or null string values are considered to have the "highest" value, so on ascending sort, these values are placed at the end of the results. Likewise, on descending sort, these values are placed at the top of the results.

For both numerical and string fields, you can use the missing_values parameter to alter this behavior. For example, here's how you can ensure that titles with null/empty/missing values are present at the top of the result set in an ascending sort:

sort_by=title(missing_values: first):asc

Likewise, to ensure that null/empty/missing values appear at the end of the results in a descending sort:

sort_by=title(missing_values: last):desc

The possible values of missing_values are: first or last.

# Group Results

You can aggregate search results into groups or buckets by specify one or more group_by fields.

Grouping hits this way is useful in:

Deduplication: By using one or more group_by fields, you can consolidate items and remove duplicates in the search results. For example, if there are multiple shoes of the same size, by doing a group_by=size&group_limit=1, you ensure that only a single shoe of each size is returned in the search results.
Correcting skew: When your results are dominated by documents of a particular type, you can use group_by and group_limit to correct that skew. For example, if your search results for a query contains way too many documents of the same brand, you can do a group_by=brand&group_limit=3 to ensure that only the top 3 results of each brand is returned in the search results.

TIP

To group on a particular field, it must be a faceted field.

Grouping returns the hits in a nested structure, that's different from the plain JSON response format we saw earlier. Let's repeat the query we made earlier with a group_by parameter:

Definition

GET ${TYPESENSE_HOST}/collections/:collection/documents/search

# Pagination

You can use the page and per_page search parameters to control pagination of results.

By default, Typesense returns the top 10 results (page: 1, per_page: 10).

You'll find detailed documentation for these pagination parameters in the Pagination Parameters table above.

# Ranking

By default, Typesense ranks results by a text_match relevance score it calculates.

You can use various Search Parameters to influence the text match score, sort results by additional parameters and conditionally promote or hide results. Read more in the Ranking and Relevance Guide.

# Presets

Search presets allow you to store a bunch of search parameters together, and reference them by a name. You can then use this preset name when you make a search request, instead of passing all the search parameters individually in each search request.

You can then change the preset configuration on the Typesense side, to change your search parameters, without having to re-deploy your application.

For example, you can create a preset configuration called a listing_view which does a wildcard search and sorts the results by a popularity score.

Let's create a preset with name listing_view.

You can refer to this preset configuration during a search operation.

You can use the preset configuration for a GET .../search end-point as well.

The only requirement is that for GET .../search, the stored preset value should be a simple dictionary of search configurations, like this.

TIP

Explicit query parameters passed to the search end-point will override parameters stored in preset value.

← Documents GeoSearch →